June 17th, 2015
Deben, a leading provider of in-situ testing stages together with innovative accessories and components for electron microscopy, report on the µXCT in situ testing being carried out in the School of Engineering at the University of Portsmouth.
Professor Jie Tong leads the Mechanical Behaviour of Materials group at the University of Portsmouth, where she directs a number of research projects in the areas of mechanics of materials and biomechanics, focusing on deformation, fatigue and fracture behaviour of engineering and biological materials and systems. There are essentially two main questions they try to answer: how materials and components respond to complex loading conditions; and how micro-structural properties dictate global material or structural responses. The group has collaborations with industrial partners on fatigue and fracture of aero-engine materials; and with NHS hospitals on biomechanical behaviour of scaffolds.
To better understand how materials behave micro-structurally when loaded in situ, they use the CT5000 5kN in situ loading stage from Deben in conjunction with a µXCT system (Nikon Metrology CT X-Ray Inspection System, X-Tek Systems Ltd). Professor Tong describes the work. "We first used the loading stage to examine how a biomaterial (scaffold) behaves under compression and its failure modes. We also used it to examine a bone-cement interface under cyclic compression and tracked the damage evolution. We used digital volume correlation (DVC) to map full-field strains post-testing. These are cutting edge applications and have been published in high impact journals [1-3]. Looking ahead, we intend to take the loading stage to synchrotron sources to do more in situ testing, if we are successful in our application for beam time."
In association with the major manufacturers of µXCT systems, Deben offers an integrated testing solution for µXCT applications. Using in situ testing with µXCT and DVC provides a clear visual and quantitative interpretation of how the properties of materials and composites change under different loading conditions. The compact design of these testing stages allow them to be used with the smallest, high resolution micro CT systems providing a range of tensile, compression and torsion stages with forces up to 25kN and resolutions down to 25mN. Systems are controlled from the comprehensive MICROTEST tensile stage control software giving a wide range of control functions and a live display of load against extension. This "live" feature is particularly important in the work of Professor Tong as the standard mechanical testing is limited to global mechanical responses only and micro structural damage can only be examined post mortem.
Image: One example is illustrated here [1]. The figure shows the local strains (right) in a 2D section of a scaffold, computed using CT images (left) from the reference and at compressive displacements of 0.2mm and 0.5mm. The sample was compressed along the loading direction. Localised deformation in Ezz along a 45° direction is evident at 0.5mm displacement.